Awlgrip Awl Quick

Call toll free - (877) 379-2248

Awl-Quick Sanding Surfacer

A quick drying, medium build, easily sanded, two component epoxy primer/surfacer. Easy to apply by brush, roller or spray. Not to be used below the waterline.

Pale Yellow Base - Mix Ratio 1:1

Part No.

Description (Click to view & order)

Price

awlD8003QT

awlD8003GL

awlD9001QT

awlD9001GL

awlT0031QT

awlT0031GL

Specification Data

Type: Epoxy Polyamide
Packaging: Available in 1 gallon and 1 quart containers
Theoretical Coverage: Sq. Feet/Gallon
609 Sq. Feet at one mil dry.
203-305 Sq. Feet at recommended dry film thickness.
Calculated for mixed base and converter reduced 50%.
Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment.
Recommended Wet Film Thickness: 5 mils (125 microns)
Recommended Dry Film Thickness: 2-3 mils (50-75 microns)
Recoatability: At 77F/50% R.H.
Spray: may be overcoated with itself, 4 hours; with 545 Primer or topcoat, 12 hours.
Brush Roll: with itself, 12 - 14 hours, with other products 12 - 14 hours.
Maximum without sanding: 24 Hours. May be overcoated with AWLGRIP®/AWLCRAFT® 2000 Topcoats, and 545 Epoxy Primer.

Note:

Sealing AWL-QUIK® with 545 Primer before applying an AWLGRIP®/AWLCRAFT® 2000 topcoat will maximize gloss and D.O.I. of the topcoat.

Product Components, Reducers, Additives, and
Auxiliary Components

Off White Base	D8003
Converter	D9001
Brushing Reducer	T0031
Equipment Cleaning	T0006, T0002, or T0031 Reducers or M.E.K.

Surface Preparation

Best when used as a surfacer over other U.S. Paint Primers. May be applied by brush or roller directly to properly prepared wood or fiberglass. Best results are obtained when these surfaces are first sealed with 545 Primer.

Mixing and Reduction

Brush/Roll: Reduce mixed D8003/D9001 as needed up to 50% with T0031.
Induction Time after Mixing: 15 Minutes
Anticipated Pot Life at 77°F/50% R.H: 8 Hours

Application Instructions

Brush/Roller: Two coats will be required. Light sanding between coats will improve appearance. For large surfaces rolling, then tipping with a brush is preferred.

Do not apply paint materials to surfaces warmer than 105°F or colder than 55°F. Do not attempt to cure products at temperatures below 55°F.

Pyacht.com
222 Severn Avenue
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 268-9696
Fax: (410) 268-9625

Join our Email List
Enter your email address in the box below and click submit to receive bi-weekly product updates and special offers.

The mark "pyacht.com" and the "pyacht.com" logo are the property of Performance Yacht.com, Incorporated and are registered with the United States Patent and Trademark Office.