Register | Login                 

Serial to USB Adaptor
(Manufactured by ATEN)

The Actisense USB to Serial (RS232) cable, provides an external plug'n'play RS232 serial connection for computers, notebooks, laptops, and handheld computing devices that support the USB specification. It comes with a standard D-type 9-pin male connector for the peripherals to plug into, and an attached 35 cm USB cable with a type A plug for connecting to the computer's USB port or USB hub.

The USB-1 serial cable provides any USB compliant device with a high quality serial connection at a data transfer rate of over 230 Kbps. It makes the USB interface transparent to the peripherals, allowing easy interface to the USB bus, eliminating the set-up hassle normally associated with traditional serial port connections.

The USB-1 serial cable is intelligent too - it can support multiple adapters per PC, and will also remember the exact communication port that each cable was last given by Windows™. This is vital to ensure that all subsequent PC bootups will use the same setup, and communicate correctly with the linked PC software (e.g. Chart-plotter).

As a USB specification compliant device, the USB-1 serial cable also supports the energy-saving suspend and resume operations. Full 'handshaking' control is possible for systems that require access to the RTS, CTS and DTR, DSR handshaking control pairs.

A data transfer or ‘handshaking’ (orange) LED is built in to the cable housing to offer direct feedback on the status of the data connection.

Pyacht.com
222 Severn Avenue
Annapolis, MD  21403

Toll free: 1-877-379-2248
Local: (410) 268-9696
Fax: (410) 268-9625

Home | Manufacturer Index | Advanced Search | Show Cart | Checkout
Anchoring/Docking | Clothing | Communications | Electrical | Electronics | Engine/Props | Interior/Galley | Maintenance | Navigation | Plumbing/Pumps | Rigging | Safety | Sailing Hardware | Sails
About Us | Contact Us | Delivery | Order Tracking | Privacy | Returns | Terms of Sale